Alumil S350 Thermal Insulated Sliding System

• Characteristics
• Two different wing profiles, S384 and S390, width 35mm. Perfect compatibility with different sliding mechanisms. Corner joint possibility with screwed corner wedges. In order to create an aesthetic integrity, all corners can be combined with the same corner wedge, even if a vertical profile of 50 mm thickness is used as an alternative. All wing profiles are designed as chambered to increase durability. S390 wing profile is designed with a special polyamide insulation bridge that will minimize the effects of expansion/contraction due to heat, in case of choosing a dark color profile in environments exposed to a lot of sunlight.
• Thermal insulation with high impermeable brushes.
• In the constructions where the middle wings are closed by leaning against each other, the appearance of the aluminum frame is reduced by half (78mm).
• The bearings are equipped with an additional insulation section designed not to affect the insulation performance of the construction. At the same time, they are produced in accordance with a glass load of up to 60kg (120kg for the wing).
• Bearings move on stainless steel (inox) rail to provide a comfortable and silent sliding movement.
• The external appearance of the construction is improved thanks to a special profile designed as a guide drainage channel.
• More water discharge possibility thanks to a specially formed chamber inside the rail profile.
• A combination of 45 degree and 90 degree cuts is available at all points where standard profiles meet narrow profiles.
• The same corner wedge is used in normal profile joints in order to provide equal performance. Less profiling. Innovative design. The S350 can work in harmony with all the available sliding mechanisms in the market, thus allowing multiple locking.